Bovie® Surgi-Center | PRO Animal Health Package

A2350-V

Bovie® Surgi-Center Pro High Frequency Veterinarian Electrosurgical Generator

The Bovie 2350-V is the premier electrosurgery unit from Bovie for Animal Health procedures. This unit is intended for cutting, coagulation, ablation of a variety of tissues. The Bovie 2350-V is suitable for general procedures, tumor removals, and gingivectomy procedures performed in an operating suite and procedure room. The Bovie 2350-V was engineered with the technology and safety of more expensive electrosurgical units but economically priced for animal health practice. The Bovie 2350-V offers more electrosurgery modalities than lower watt models including four (4) blend settings, allowing Veterinarians to deliver safe and precise energy applications during more complex surgical procedures. Dual monopolar ports can be activated simultaneously in fulguration to control bleeding or treat superficial tissue. The dual ports can also be utilized separately in different modes. The Cut II specialized laparoscopic mode is engineered with a lower voltage than competitive units reducing the risk of alternate site burns and increasing patient safety during minimally invasive procedures. Bovie FDFS™ technology measures tissue impedance 5,000,000 times a second and adjusts output 5,000 times a second for consistent energy delivery in a variety of tissues. Bipolar features are activated using a separate dedicated foot control maintaining sterility during the procedure. 10 presets for quick and easy setup.

Request a Quote

MONOPOLAR WATTS VPEAK MAX VOLTAGE CREST FACTOR (TYPICAL) FREQUENCY (KHZ)
Cut I 200 1000V 1.7 ± 20% 490 kHz ± 4.9 kHz
Cut II  200 750V 1.7 ± 20% 490 kHz ± 4.9 kHz
Blend (1) 200 1320V 1.8 ± 20% 490 kHz ± 4.9 kHz
Blend (2) 200 1475V 2.0 ± 20% 490 kHz ± 4.9 kHz
Blend (3) 200 1650V 2.2 ± 20% 490 kHz ± 4.9 kHz
Blend (4) 200 1870V 2.4 ± 20% 490 kHz ± 4.9 kHz
Pinpoint Coagulation 120 1800V 3.1 ± 20% 490 kHz ± 4.9 kHz
Spray Coagulation 120 4000V 6.0 ± 20% 350 to 450 kHz
Gentle Coagulation 120 450V 1.6 ± 20% 490 kHz ± 4.9 kHz
BIPOLAR WATTS VPEAK MAX VOLTAGE CREST FACTOR (TYPICAL) FREQUENCY (KHZ)
Macro Bipolar 80 600V 1.5 ± 20% 490 kHz ± 4.9 kHz
Micro Bipolar 80 500V 1.5 ± 20% 490 kHz ± 4.9 kHz
Standard Bipolar 50 250V 1.5 ± 20% 490 kHz ± 4.9 kHz
Cooling System Passive Cooling
Technology Isolated RF Output
Audible/Visible Output Meter Yes
Pre-set Feature Yes
Monopolar HP Ports 2 Port(s)
Connector Ports/Power Switch White
Warranty 4 years
Width 37.5 cm (14.75 in)
Contact Monitoring Systems Range/Trip Point 10 ohms or less over entire operating range (10C° to 40°C)
Dual Activation Tone Alert Yes
Depth 46 cm (18.1 in)
Weight < 9.07 kg (<20 lbs)
Height 16.5 cm (6.5 in)

SPECIALIZED LAPAROSCOPIC MODE

Bovie’s Cut II is tailored specifically for Laparoscopic procedures. The mode offers a precisely managed cutting energy that limits output thereby minimizing the potential risk of capacitive coupling and alternate site burns.

DUAL MONOPOLAR SPRAY ACTIVATION

The Bovie 2350-V offers simultaneous activation in spray with audible activation tones. The simultaneous delivery produces equal and even power outputs in each accessory, for a safer delivery of dual monopolar energy.

ADJUSTABLE POWER DURING ACTIVATION

The power can be adjusted up or down in variable steps while performing a procedure, to increase procedural efficiency and provide the appropriate amount of power to the surgical site.

SURGICAL MEMORY TECHNOLOGY

The 2350-V recalls the last used power and mode. The surgeon can store 10 user-defined RF presets for easy recall.

PATIENT SAFETY FEATURES

  • Bovie FDFS™ – The tissue sensing technology measure tissue 5 million times a second and adjusts to varying impedances 5000 times a second for accurate energy delivery.
  • Automatic system self-checks upon powering up the unit.

ENERGY SETTINGS

 
 

CUT

Cut I

A general cutting with a standard RF waveform used in open and endoscopic surgical procedures, Cut I is for use in a wide range of tissue with minimal hemostasis.

Cut II

Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output for minimizing the potential risk of capacitive coupling and alternate site burns due to weakened insulation.

Blend (Level 1, 2, 3 & 4)

Blended cutting offers varying levels of hemostasis during a cut procedure providing increased control of bleeding at the surgical application site.

  • Level 1: 75% Duty Cycle
  • Level 2: 62.5% Duty Cycle
  • Level 3: 50% Duty Cycle
  • Level 4: 37.5% Duty Cycle
 
 
Cut
 

COAGULATION

Pinpoint

A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.

Spray

Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.

Gentle

Gentle mode offers more concentrated coagulation than in other modes. When coagulation is necessary in short amounts of time, reduced electrode carbonization is provided.

 
 
Coag
 

BIPOLAR

Macro

Intense bipolar output allowing for aggressive coagulation, with cut-like effects over a wide range of tissue.

Micro

Fine bipolar coagulation for use in extremely gentle and precise surgical applications.

Standard

Bipolar coagulation which gently coagulates tissue for minimal tissue damage reducing carbonization and sticking. Maximum power is 50 watts.

 
 
Bipolar
 

RECEPTACLE PANEL

 
 
Monopolar 1

Monopolar 1 Handswitching/
Footswitching Receptacle

Accepts standard 3-pin handpieces or accepts footswitching adapter (A1210A) or cable (A1210D or A1210R). Connect handswitching accessories.

 

 
Monopolar 2

Monopolar 2 Handswitching Receptacle

Accepts standard 3-pin handpieces. Connect handswitching accessories.

 
Bipolar

Bipolar Receptacle

Accepts standard cables for bipolar handpieces. Connect bipolar accessories.

ACCESSORIES